BT- 61SL 60-LED Bright Solar Motion Sensor Light with Amorphous Solar Panel with 15 ft. (4.5m) of wire
How to use the Control Dials
The Solar Security Light lets you adjust the settings with the use of three control dials: LUX, SENS, and TIME.
This setting measures ambient light and determines when the unit will come on as ambient light fades.
When set to maximum, the light will turn on automatically in most day/night situations ranging from dusk to dawn.
When set to minimum, the light will turn on only when it is dark. This setting is most appropriate when using the light during the very late-evening and night hours.
This setting determines the range of the motion sensor.
Its mid position is the normal setting.
The maximum position extends the sensor range to 10 meters.
This setting determines the duration the light stays on after detecting nearby motion.
This duration can range from 8 seconds to 2 minutes.
To increase the duration turn the dial clockwise.
- Light Power: 4W
- Lumen: 600 Waterproof: IP44
- Amorphous Solar panel: 9V 1W
- Battery: 4400NI-MH
- LED quantity : 60pcs
- Battery : 3.7V 1200mAh Li-ion
- Solar Panel : 1W/6V
- Time delay : 8 sec -2 min
- Sensor angle : 180°
- Sense distance : 2-10m(24?)
- Three switch : ON/OFF/Automatic
- Solar Panel Cable Length : 5 Meters Attention.
- The wire on the solar panel must be plugged into the light to charge the internal battery After pluging in the solar panel wire, the light will not light up in the day, but will auto light up at night in Auto mode
- 1 x Motion Sensor Light
- 1 x Solar panel
- 2 x Mounting Accessories kit(include 4 screw,8 Sleeve)
- 1 x User Manual